PUTULIM polystyrene adhesive

Special glue for gluing foam polystyrene insulation and decorative plates.

FEATURES:

• Ready for use;
  
• Good adhesion to wood, concrete and plaster;
  
• Does not contain organic solvents;
  
• Does not dissolve foam polystyrene;
  
• Does not perish when long time stored in hermetically sealed containers;
  
• Small mass consumption on 1m².
  

USER GUIDE: Mix the glue before use. Processed surface should be clean, without grease. Glue should be applied on both surfaces using a roller, justified with a serrated trowel and dried for approximately for 5 min. Afterwards, carefully place the board in the intended place and press it. Works should be performed at the temperature not lower than +10°C. Tools to be washed with water.

CONSUMPTION: approximately 1 l/6-8m².

DRYING TIME: Approximately 3 hours. Depending on the thickness of the covered layer.

STORAGE: In original package in temperature 20ºC, storing period indicated on the label. Keep away from freezing. Mix well before use.