LOG END sealing treatment
Firming prime for treating log ends. Decreases moisture absorption ability and strengthens wood structure. Diminishes damages caused by the wood pests.
Usage: Log ends should be dry and clean. Prime is applied with a wide brush. Well absorbent surface should be treated repeatedly “wet over wet”. Prime should be fully absorbed, not forming a film on the wooden surface. After the treatment the surface should retain the remaining absorption capability for its further painting.
Consumption: Approximately 1l /10-15m².
Drying: Complete drying time: 10-12 hours, depending on the ambient temperature and the amount of applied layers.
Storage: In original package, at temperature above 0ºC stored approximately for – see the label. May not freeze. Mix well before use.
Usage: Log ends should be dry and clean. Prime is applied with a wide brush. Well absorbent surface should be treated repeatedly “wet over wet”. Prime should be fully absorbed, not forming a film on the wooden surface. After the treatment the surface should retain the remaining absorption capability for its further painting.
Consumption: Approximately 1l /10-15m².
Drying: Complete drying time: 10-12 hours, depending on the ambient temperature and the amount of applied layers.
Storage: In original package, at temperature above 0ºC stored approximately for – see the label. May not freeze. Mix well before use.