Screwable in boiler or accumulation tank ion heating element STAFOR 5-10 SI
Ionic heating heating element intended for deployment in storage, accumulation tank or boiler for tubular heating element (THE) replacement. It can maintain stable required heat carrier (coolant) temperature in the tank or, thanks to ionic heating technology specific proporties, ensure quick heating of it. Built-in ion heating element is used as an additional source of heat in thermodynamic systems STAFOR COMBI.
In heating system with ion boiler (heater) it is obligatory to use special heat transfer fluid (heat carrier, coolant) for ion boilers STATERM EKO E40. All volume of accumulation tank or boiler must be filled with it.
Technical parameters
№ | Parameter | Unit | Data |
1. | Rated voltage one-phase AC In | V | 230 ± 10% |
2. | The minimum frequency of the AC | Hz | 50 |
3. | Operating current, not more than | A | 50 (cable 3*4mm²) |
4. | Nominal power | kW | 10 |
5. | Applied operating power, at a temperature of +15°C | kW | 5-10 |
6. | Heat carrier STATERM EKO E40 with conductivity not more than | µS | 230 |
7. | The maximum temperature at the outlet of the ion boiler | °C | 90 |
8. | The work temperature at the outlet of the ion boiler | °C | 70 |
9. | The size, length/diameter | mm | 325/60 |
10. | Weight, not more than | kg | 3,00 |
11. | Class of protection against electric shock | - | I |
12. | The degree of protection from moisture | - | IP44 |